Checklist of Supplies Needed to Use

Micro-Blaster II "Triple Head" Kit


 1 - MICRO-BLASTER II
        "Triple Head" KIT



  • 3 Micro-Blaster Heads

  • 3-way hose connector with slide valve to link 3 Micro-Blaster heads

  • Bulb Blower & Bore Brush
    (for cleaning drill holes)

  • 2 Tapered Pins
    (for wedging apart cracked material)

  • Instruction Manual for Safe Use









 2 - Micro-Blaster Cartridges
          available here
  

 3 - ROTARY HAMMER DRILL
         (with SDS+ Chuck)

  • 110 volt   (± generator
    depending on worksite)

      ------ or -------

  • Battery powered
    available here

      ------ or -------

  • Gasoline powered


 4 - Tungsten Carbide
         DRILL BITS

         (to fit SDS+ Chuck)
         available here


  • 5/16" diameter and
    long enough to drill 25-30 cm deep


 5 - AIR SOURCE

  • 4 or 5 gallon air tank with 1/4" quick link.
    available in hardware and autoparts stores

       ------ or -------

  • 1/2 gallon aluminum air tank and bike pump
    (for greater portability).
    available here



Home   |    Examples   |    Products  |   Uses   |   Drilling   |    Checklist   |    Contact   |    About   |    Top

Available from
ALPINE GEMS
Ph; (613) 549-3728
E-mail; brad@alpinegems.ca